How to Flash Asus Zenfone 2 via ADB Sideload

How to Flash Asus Zenfone 2 – When you’re engrossed modify your Zenfone 2 is bricked and stops rebooting or gets stuck at boot logo (bootloop) or leads to force close errors, then you can fix these issues by simply flashing the base firmware back on Zenfone 2. At this time Asus Zenfone Blog will share Guide to Flashing Asus Zenfone 2 Bootloop via ADB Sideload.

I will explain a little bit what it bootloop, bootloop is a problem that occurs on the android system which can not perform startup before going to the home menu, things may have happened is automatically returned to the initial state as when you turn on the smartphone, practically stopped at the logo a smartphone, the following How to Flash Asus Zenfone 2 bootloop.

flash asus zenfone 2, flash zenfone 2, flashing zenfing zenfone 2, zenfone 2 bootloop

Guide to Flash Asus Zenfone 2 Bootloop

Preparing Tools

Flash Asus Zenfone 2

  1. Turn off your Zenfone 2
  2. Go to recovery mode (Tutorial HERE)
  3. Select apply update from ADB
  4. Connect your Zenfone 2 to your PC with USB cable
  5. Open command prompt in Windows (in the same folder where ADB is located)
  6. Check connection by type adb devices if connection successful will be a list of Zenfone 2 device
  7. Type adb sideload ( the filename, asus zenfone firmware that you download earlier)
  8. Wait until the process is complete
  9. Zenfone 2 will flash to clean thoroughly

This method can be used to downgrade, or that an error while installing root (root will disappear completely)

How to Flash Asus Zenfone 2 via ADB Sideload | admin | 4.5
error: Content is protected !!